How To Use Bissell Powerforce Powerbrush Pet

Bissell Powerforce Powerbrush Pet

back up.BISSELL.com.

IMPORTANT Condom INSTRUCTIONS

READ ALL INSTRUCTIONS Before USING YOUR Apparatus.
When using an electrical appliance, basic precautions should be observed, including the following:

WARNING TO REDUCE THE RISK OF FIRE, Electric Daze, OR INJURY:

» Connect to a properly grounded outlet simply. Encounter grounding instructions. Do not modify the 3-prong grounded plug.
» Keep hair, loose clothing, fingers, and all parts of torso abroad from openings and moving parts.
» Do non leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.
» Plow OFF all controls before plugging or unplugging the apparatus.
» Use actress intendance when cleaning on stairs.
» Use indoors only.
» Practice not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
» Practice not permit to be used as a toy. Close attending is necessary when used by or near children.
» Do not utilize the apparatus in an enclosed space filled with vapors given off by oil-based paint, pigment thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
» Do not apply for any purpose other than described in this user guide. Use only the manufacturer's recommended attachments.
» Do non use with damaged cord or plug. If the appliance is non working as it should or has been dropped, damaged, left outdoors, or dropped into water, take it repaired at an authorized service heart.
» Do non utilize to pick upward toxic fabric (chlorine bleach, ammonia, drain cleaner, etc.).
» Do non pick up annihilation that is burning or smoking, such as cigarettes, matches, or hot ashes.
» Do not pull or carry by cord, use cord every bit a handle, close a door on string, or pull cord effectually sharp edges or corners. Do non run apparatus over cord. Go on cord away from heated surfaces.
» Use but BISSELL® cleaning products intended for use with this apparatus to prevent internal component damage. Meet the Cleaning Formulas section of this guide.
» Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
» Do not handle plug or apparatus with moisture hands.
» Do not immerse. Use just on surfaces moistened by the cleaning process.
» Practice non carry the apparatus while in utilize.
» Go on appliance on a level surface.
» Do not put whatever object into openings. Practise not use with whatsoever opening blocked; keep openings gratuitous of grit, lint, hair, and annihilation that may reduce airflow.
» E'er install float before any wet pick-up functioning.

SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR HOUSEHOLD USE But. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER'South WARRANTY.

Alert

Improper connection of the equipment-grounding conductor can result in a run a risk of electrical shock. Bank check with a qualified electrician or service person if you aren't sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will non fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for apply on a nominal 120-volt circuit and has a grounding zipper plug that looks like the plugin the
illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this apparatus.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If information technology should malfunction or break down, grounding provides a safe path of to the lowest degree resistance for electrical current, reducing the risk of electric shock. The string for this apparatus has an equipment-grounding conductor and a grounding plug. It must merely be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

What's in the Box?

Standard accessories may vary by model. To identify what should exist included with your purchase, please refer to the "Carton Contents" list located on the carton tiptop flap.

Assembly

Go to support.BISSELL.com for assembly videos.

i. Slide Center Handle onto Lower Body until information technology "clicks" into place.

2. Slide Upper Handle into Middle Handle until information technology "clicks" into place.

3. Identify Clean Water Tank on the handle and push downwardly until it "clicks" into place.

4. Wrap upwards the power string.

Cleaning Formulas

View our family of carpet cleaning formulas for your family of mess makers at BISSELL.com.

Keep plenty of BISSELL® formulas on hand so you can make clean whenever information technology fits your schedule. Always use genuine BISSELL formulas in your automobile. Other formulas may harm the motorcar and void the warranty.

Pretreat

Machine Formula

Certain trademarks used under license from The Procter & Take a chance Company or its affiliates

WARNING To reduce the hazard of fire and electric shock due to internal component damage, utilize simply BISSELL cleaning formulas intended for use with the carpet cleaning device.

Filling the Clean H2o Tank

For additional tips and tricks on filling your Clean Water Tank visit back up.BISSELL.com.

1. Remove the Clean Water Tank by lifting directly upwardly and away from the machine.

2. Unscrew the cap at the bottom of the tank.

3. Fill up with hot (140°F/60°C MAX) tap water to the WATER line. Exercise non use humid water. Do non heat h2o in the microwave.

4. Add the BISSELL formula to the FORMULA line.

5. Supplant and tighten the cap.

half-dozen. Replace the tank on the machine until it "clicks" into place.

Cleaning Your Rug

For additional carpet cleaning tips, caput to support.BISSELL.com.

Tips Before Cleaning

If cleaning an entire room, consider moving your piece of furniture to another area.
Use a dry out vacuum cleaner over the area earlier using your deep cleaner.
Remove whatsoever large, solid droppings before moisture cleaning.
Pretreat stains with BISSELL® Pretreat to meliorate performance on java stains and ground-in dirt.

1. Plug into a proper outlet.

ii. Turn the car ON by pressing the power switch.

3. Stride on the recline pedal located below the power switch.

4. Brand cleaning passes. Echo these passes until the solution beingness pulled up appears make clean. Empty the Dirty Water Tank and refill the Clean H2o Tank as needed.

Hold Spray Trigger
· 1 pass forward
· i pass back
Release Spray Trigger
· 1 laissez passer forward
· i pass back

Emptying the Dirty Water Tank

For maintenance how-to videos, visit support.BISSELL.com.

one. Turn OFF and unplug your car.

ii. Release Dirty Water Tank by pulling out and up on the latches on the side.

three. Carefully remove tank past lifting upwards on the Dirty Water Tank Handle.

4. Lift tab on the top of the tank.

v. To empty, cascade out muddied water using the opening at the back of the tank. Rinse the tank thoroughly. Reinsert tab into the tank.

six. To keep cleaning, align the bottom of the tank to the base and secure it into place with latches.

Important
» Please check manufacturer'south tag before cleaning area rugs for any specialized cleaning instructions. We practice non recommend deep cleaning fragile, silk, wool, antique, or area rugs without a manufacturer's tag.
» Do non overwet rug. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.

Later-Cleaning Care

For more tips on maintaining your machine, visit support.BISSELL.com.

i. Plow OFF and unplug your machine. Follow steps 2 & 3 in the section above to remove the Dirty Water Tank.

ii. Grab the height of the Nozzle and pull it upwards and away from the machine. Rinse or wipe information technology clean. Employ a cloth to wipe droppings from the red filter.

3. Utilize a cloth to wipe clean.

four. Ensure the Dirty Water Tank is empty by gently removing the float stack and unscrewing the ring at the bottom of the tank. Follow steps 4 & 5 on page 5.

five. Clean and rinse debris from the bladder. Keeping the float clean prevents your Muddied Water Tank from overflowing and ensures the seal stays intact.

vi. Once clean, gather by aligning the arrow on the bladder with the notch on the tank. Then, return the ring and twist it to lock. Make certain it's fully aligned, and then water doesn't leak.

7. To replace the Nozzle, marshal the elevation into the channel in front end of the red filter and printing it in identify.

8. Use both hands to push the bottom portion of the Nozzle into place.

9. Once the Dirty Water Tank is dry align the bottom of the tank to the base and secure it into identify with latches.

Attention If yous experience no suction, remove the Dirty Water Tank and ensure the Nozzle is secured and latched appropriately. Return Dirty Water Tank to the machine and try cleaning again.

Alarm To reduce the chance of fire, electric shock, or injury, plow the ability OFF and disconnect the plug from the electrical outlet before performing maintenance or troubleshooting.

Replacing the Belt & Brush Curlicue

For maintenance how-to videos, visit support.BISSELL.com.

1. Turn OFF and unplug your automobile. Use a Phillips-head screwdriver to remove the 3 screws.

2. Remove belt cover.

3. Pull Brush Coil out and remove the belt from the track.

4. Pull the belt off of the motor shaft.

5. Wrap a new belt around the motor shaft.

6. Put the belt on the Brush Roll rail. Put the Brush Curl back into position.

7. Align Brush Roll mount to screw post.

eight. Reposition belt cover.

9. Reinstall 3 screws.

Any other maintenance or servicing not included in this manual should be performed past an authorized service representative.

Warning To reduce the run a risk of fire, electrical stupor, or injury, turn the power OFF and disconnect the plug from the electric outlet earlier performing maintenance or troubleshooting.

Storing Your Machine

Visit support.BISSELL.com for additional maintenance tips for your machine.
Store your machine in a protected, dry expanse. When finished using the product, wrap the string around the cord wrap for storage.
Notice: To reduce the take chances of a leaking condition, exercise not store machines where freezing may occur. Damage to internal components may result.

Troubleshooting

For a comprehensive walkthrough of your product and support tips visit support.BISSELL.com.

This guide has everything you need to get set for first use, including setting up, using, and maintaining your machine, but online y'all'll find additional resources like tips and troubleshooting, videos, product registration, parts, and more.

Warranty

The i-Year express warranty may vary by state. Visit back up.BISSELL.com or call 1-800-237-7691 for complete warranty data.

support.BISSELL.com

But wait, there'south more!
Join usa online for a complete guide to your new product, including
troubleshooting, product registration, parts, and more than.
Become to back up.BISSELL.com.

DOWNLOAD Resources

Bissell Powerforce Powerbrush Pet [pdf] Instructions Powerforce Powerbrush Pet, Series 2910
Read more: https://manuals.plus/bissell/powerforce-powerbrush-pet-transmission#ixzz7dfCvprvK

FAQ'S

What is the departure between Powerbrush and Powerforce models?

The Powerbrush model has a motorized brushroll that rotates at two speeds. The Powerforce model does not take a motorized brushroll. Both models have the same suction power and can exist used to vacuum carpets or blank floors.

How do you use the Bissell Powerforce Powerbrush pet?

Design has a new float valve for the dirty water tank so no more getting the water sucked up into the motor and sprayed back out onto the clean. Ground. So that's a plus information technology has a removable nozzle.

Is Powerforce Powerbrush pet a vacuum?

Lifts away dirt and stains that a vacuum leaves behind. Tackle Tough Pet Messes. Great for cleaning high traffic areas, small spaces and surface area rugs where pet messes happen. Lightweight & Powerful.

How exercise y'all make clean a Bissell Powerforce pet?

First, remove the drove tank past pulling up and out on the latches on both sides of the tank.
Advisedly remove the tank by lifting up on the tank carry handle.
To empty the tank, cascade out the contents through the opening on the the back of the tank.
So rinse the tank thoroughly.

Can I utilise vinegar and water in my Bissell Powerforce?

Create a cleaning solution with one office white vinegar and one role hot water. Clean the window frames by wiping them down with a cloth that'south dampened with an all-purpose cleaner and h2o. Then wipe the solution away with a clean h2o textile and dry the frame thoroughly.

How do you use attachments on a Bissell pet vacuum?

When you lot're washed using the above flow tools put the hose back on the wand. Then put the wand back on the vacuum by sliding it into place. That's it nosotros promise you constitute these tips useful.

Why is my Bissell Powerforce Powerbrush not spraying?

If your TurboClean™ has reduced or no spray these tips may assistance. First, remove the collection tank by pulling up and out on the latches on both sides of the tank. Now rinse the nozzle under running h2o and set it bated to dry.

How do y'all remove the castor from a Bissell Proheat pet?

Pull up on the accessory hose door located on the peak of the pes to remove the brushroll cover press the to release buttons. And lift direct upwards.

Why is there no h2o coming out of my Bissell Proheat pet?

If your machine is still not spraying, check to make sure the clean tank has water and/or the water & formula mixture in the tank. If your tank is empty, this could be the reason your automobile is non spraying. You will demand to make full your clean tank again. Reset the tank and ensure it sits snug on the auto.

Tin I use any detergent in Bissell Proheat pet?

It's possible to use others, but we recommend against it. Our formulas comprise no dyes, phosphates or optical brighteners, and volition produce optimal cleaning performance when used in combination with BISSELL carpet cleaning machines.

How do I fix my Bissell Proheat pet?

This can become caked upwardly in pet hair if it's caked up in pet hair or dirt rinse it off scrub information technology with a toothbrush or some blazon of brush dry out it and identify it dorsum inside of your auto.

Documents / Resources

References

Source: https://manuals.plus/bissell/powerforce-powerbrush-pet-manual